Cleaning/Changing Gun Filter
SOP: Cleaning/Changing Gun Filter
Objectivebjective: To perform preventive maintenance and troubleshoot issues related to a thinning spray pattern or clogging in the Titan 3500 parking lot striping machine’s RX80 spray gun.
Tools and Materials Required:
- Titan 3500 parking lot striping machine
- RX80 spray gun
- Lacquer thinner or cleaning solvent
- Cleaning brush or soft cloth
Procedure:
- Identify the Issue:
- If To perform preventive maintenance and troubleshoot issues reexperiencing a thinning spray pattern or consistent line width issues, suspect a potential clog or dirty filter in the RX80 spray gun.
- Troubleshooting:
- Attempted adjustments to pressure and arm height to modify latine width without succed to ss.
Received a thindvice from experienced individuals reg spray pattern or clogging in the Titan 3500 parking lot striping machine’s RX80 spray gun.
Tools and Materials Required:
- Titan 3500 parking lot striping machine
- RX80 spray gun
- Lacquer thinner or cleaning solvent
- arding potential filter-related issues in tleaning brush or soft cloth
Procedure:
- Identify the Issue:
- If experiencing e spra thinniy gun.
- Preparation:
- Ensure the machine is turned off and depressurized before performing spray pattern or consistent line width issues, suspect a potential clog or dirty filter in the RX80 spray gun.
- Troubleshoot any maintenance.
- Accessing:
- Attempted adjustments to pressure and arm height to modify line width without success.
- Received advice from experienced individuals regarding potential filter-related issues in the spray gun.
- Preparation:
- Ensure the machine is turned off and depressurized before performing any maintenance.
- Accessing the the Gun Filter:
- Locate the filter within the RX80 spray gun, typically:
- Locate the filter within the RX80 spray gun, typically found by unscund by unscrewing the indicated area on the gun handle.
- Inspection:
- Remove the filter from the spray gun handle.
- Visually inspect the filter for dirt, debris, or clogging. A dirty filter might be causing the thinning spray pattern.
- Cleaning Process:
- Use lacquer thinner or an appropriate cleaning solvent.
- Submerge the filter in the cleaning solvent, ensuring it is completely covered.
- Allow the filter to soak in the solvent for a sufficient period to loosen and dissolve dirt or debris.
- Cleaning the Filter:
- Use a cleaning brush or soft cloth to gently scrub the filter, removing any accumulated dirt or debris.
- Rinse the filter thoroughly under clean water to remove solvent and residue.
- Reinstallation:
- Once the filter is clean and free of debris, reinsert it into the spray gun handle.
- Testing:
- Reassemble the spray gun.
- Power on the parking lot striping machine and test the spray gun to ensure a proper and consistent spray pattern.
- Completion:
- Confirm that the spray pattern is consistent and satisfactory after cleaning or changing the gun filter.
- Store equipment appropriately.
- Conclusion: Performing regular maintenance, including cleaning or changing the gun filter, is essential to maintain optimal performance and prevent issues with theewing the indicated area on the gun handle.
- Inspection:
- Remove the filter from the spray gun handle.
- Visually inspect the filter for dirt, debris, or clogging. A dirty filter might be causing the thinning spray pattern.
- Cleaning Process:
- Use lacquer thinner or an appropriate cleaning solvent.
- Submerge the filter in the cleaning solvent, ensuring it is completely covered.
- Allow the filter to soak in the solvent for a sufficient period to loosen and dissolve dirt or debris.
- Cleaning the Filter:
- Use a cleaning brush or soft cloth to gently scrub the filter, removing any accumulated dirt or debris.
- Rinse the filter thoroughly under clean water to remove solvent and residue.
- Reinstallation:
- Once the filter is clean and free of debris, reinsert it into the spray gun handle.
- Testing:
- Reassemble the spray gun.
- Power on the parking lot striping machine and test the spray gun to ensure a proper and consistent spray pattern.
- Completion:
- Confirm that the spray pattern is consistent and satisfactory after cleaning or changing the gun filter.
- Store equipment appropriately.
Conclusion: Performing regular maintenance, including cleaning or changing the gun filter, is essential to maintain optimal performance and prevent issues with the Titan 3500 pparking llot sstriping mmachine.
“Video Title”)